General FAQ:

What is a Digital Microscope?
A digital microscope is a magnifying device equipped with a digital camera.  Basically, there are two
types; one type is a microscope or magnifying device with a built-in digital camera while the other type is
a standard style microscope adapted with a eye piece that has a image sensor.

How to set-up the Hardware and Software?
User’s Manual on CD is included, be sure to read the User Manual before use. Please retain this CD for
future reference. Installation of Amcap Application Software is easy. Just follow the step by step
instructions. The CD will guide you through to the end of the installation.  IMPORTANT: Install the driver
and software BEFORE you connect the digital microscope to your computer.

What are the system requirements for my computer?
     1. Windows 98SE, ME, 2000 or XP, Vista.
     2. Intel CPU Pentium 700MHZ, Celeron or above.
     3. RAM of 256 MB or more recommended.
     4. At least 20MB of free disk space.
     5. VGA Card: 16bit or above
     6. CD-ROM drive
     7. At least one USB 1.1 or 2.0 port.

Maintenance and Cleaning
All digital microscopes and eyepiece camera internal components are sealed within the housing and
require only occasional cleaning to maintain their optical integrity.

It is recommended that these instruments be used and stored in a clean, cool and dry environment and
that care be taken to keep them free of dust and other contaminants.
Avoid exposing to fumes and extreme temperatures and never immerse or rinse in water.
If cleaning is required then first attempt to gently blow off any dust or other contaminants with
compressed air.  If no compressed air is available then try to lightly brush off any lose debris with a fine
brush (a makeup brush will work well).
If it becomes necessary to clean the lens then we recommend using a standard optical lens cleaning
solution.  To make your own optical lens cleaning solution, mix one part alcohol (C2H5OH) with three
parts ether ((C2H5)2O).  Simply saturate a cotton swab and gently wipe the lens surface clean.
Avoid touching the surface of the lens with your finger tips.  
CAUTION!!!   Never disassemble or open the scope or camera body.  This will introduce dust and other
contaminants and may cause permanent damage.

What is the purpose of LED light?
Light Emitting Diode (LED) is a semiconductor device that emits light when an electric current passes
through it. LED lights are brighter in one spot while regular lights are softer.

What is the magnification of AeroBile the Digital Microscope?
The AeroBile Digital Microscopes offer magnification ranges from 10X continuously to about 50X, then
200X without changing the lenses.  

AeroBile